What does Du mean on Whirlpool washer?
Joseph Russell news
Whirlpool Cabrio Washer Error DU. The Cabrio Washer DU error code happens when the main control detects a problem with the lid lock assembly not being able to unlock properly or the control cannot determine if the door lock assembly is in a locked or unlocked state.
.
Thereof, what does Du mean on a washing machine?
door unlock
Likewise, how do I find the error code on my Whirlpool Duet washer? Whirlpool Duet Alpha front-load washer error codes
- SUDS. Excessive suds. Check/
- F0 E1. Load detected during the washer cleaning cycle. Check/
- F1 E1. Main control board failure.
- F1 E2. Motor control board error.
- F2 E3. Main control board mismatch or main control board failure.
- F3 E1. Water level pressure switch failure.
- F3 E2. Temperature sensor failure.
- F4 E0. Water heater failure.
Similarly, how do I clear the error code on my Whirlpool washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
How do I clear the error code on my Kenmore washer?
You will need to remove the power supply to the washer to reset the code.
- Look for the "Pause/Cancel" button on the washer control panel.
- Press the "Pause/Cancel" button twice to cancel the wash cycle.
- Check for kinks in the water supply hose while the washer does not have power.
Related Question Answers
What does dE mean on a Kenmore washer?
Kenmore dE - DOOR OPEN ERROR // Main control detecting a problem with door/lid lock system.Why is my Kenmore washing machine beeping?
You say the washer works but the beeping is constant so the first thing I suggest you try is to put the washer into a control lock and see if the beeping continues. If you try this and the beeping stops then there is likely a stuck button. If the beeping doesn't stop then you most likely have a control board problem.What does Du mean on Maytag washer?
Door Unlock Failure
How do you reset a washing machine?
How to reset the washing machine:- Press POWER to turn the washer off.
- Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
- With the power disabled, press and hold the START/PAUSE button for 5 seconds.
- Plug the washer back in, or turn the circuit breaker back on.
What does F mean on my Whirlpool washer?
The Whirlpool Duet washer has a series of error codes that indicate specific problems. The F/dL code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen.How do you reset a front load washer?
How to reset the washing machine:- Press POWER to turn the washer off.
- Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
- With the power disabled, press and hold the START/PAUSE button for 5 seconds.
- Plug the washer back in, or turn the circuit breaker back on.
How do I reset my Whirlpool front load washer?
Unplug the washer for 30 seconds to attempt to reset the Duet washer control. You can manually unlock the washer by removing the top (remove screws on the back of the top panel and slide the top panel back to lift off.How do you fix the F 28 code on a Whirlpool Duet washer?
How to Fix the F-28 Code on a Whirlpool Duet- Unplug the electrical cord from the wall outlet.
- Open the detergent tray on the top of the washer and locate the Phillips screws that hold it in place.
- Remove the detergent tray screws using a Phillips screwdriver and pull off the tray.
- Find the control console unit reset lever and pull it toward you.
